jQuery not supported.



After market backup camera electrical connections

where to connect power and switch connections
Moderator: Machster69

Re: After market backup camera electrical connections

Postby ga3 [OP] » Jul 16 2012, 3:12pm

The accs power mods that you are referring to in fuse circuit 43 turn off with ign shut down????? i have not tested that circuit, but if it does i will purchase the bussmann circuit adapter and use that.
Original Poster
ga3
Firing on 2 cylinders [L1]
Firing on 2 cylinders [L1]
Posts: 22
Topics: 3
Blogs: 0
Joined: Jul 11 2012, 3:16pm
Location: ny
Year: 2011
Make/Model: Chevrolet Silverado
Extra Info: lt
Group Membership:
Registered users
Related Topics  Backup Camera   Backup camera install help   Backup camera fuse   Installed a backup camera   Factory Backup Camera   Factory Backup Camera Wiring   backup camera guide lines?   Installing a wireless backup camera   Non Factory Backup Camera Problem   Reverse wire for backup camera   Installed Backup Camera - 2011   Backup camera mirror w/ onstar and compass   Rear View Backup Camera Kit   Magellan GPS w/wireless backup camera problems 
Electrical Sponsor
Advertise Here

After market backup camera electrical connections

Postby Machster69 » Jul 16 2012, 3:44pm

Idk about them being linked to the ign shutdown? I jus know there is limited if any acc power points on these nnbs vehicles vs the obs or even nbs styles. Those write ups were supposed to provide that acc power...
Image
User avatar
Machster69
Shifting into Sixth Gear! [L3]
Shifting into Sixth Gear! [L3]
Posts: 7168
Topics: 56
Images: 12
Blogs: 8
Joined: Feb 16 2012, 3:03pm
Years of membership: 1 year of membership
Location: Baton Rouge
Year: 2010
Make/Model: GMC Sierra
Extra Info: 5.3 SLE 2wd
Group Membership:
How-to Authors
Forum Moderator
Registered users

Re: After market backup camera electrical connections

Postby ga3 [OP] » Jul 16 2012, 3:54pm

thanks
Original Poster
ga3
Firing on 2 cylinders [L1]
Firing on 2 cylinders [L1]
Posts: 22
Topics: 3
Blogs: 0
Joined: Jul 11 2012, 3:16pm
Location: ny
Year: 2011
Make/Model: Chevrolet Silverado
Extra Info: lt
Group Membership:
Registered users

Re: After market backup camera electrical connections

Postby Machster69 » Jul 16 2012, 10:33pm

So i just thought about it....
The usb is only power when the key is on, then loses power when the key is off.... im not sure exactly what that means yet as I have looked at the electricals on it BUT thats gonna be our lead!!!! Investigate and so will I

Last time I dealt with usb as a power source, it was just a red, black, yellow, and uhhh bare wire??? but only two of the wires were for power, red and black! SO, maybe we could splice into or split the usb and come off of it for power????
Image
User avatar
Machster69
Shifting into Sixth Gear! [L3]
Shifting into Sixth Gear! [L3]
Posts: 7168
Topics: 56
Images: 12
Blogs: 8
Joined: Feb 16 2012, 3:03pm
Years of membership: 1 year of membership
Location: Baton Rouge
Year: 2010
Make/Model: GMC Sierra
Extra Info: 5.3 SLE 2wd
Group Membership:
How-to Authors
Forum Moderator
Registered users

Re: After market backup camera electrical connections

Postby ga3 [OP] » Jul 18 2012, 12:34am

I am looking at the rear window defogger ,windshield washer pump two separate circuits circuits,the usb circuit comes out of the radio 5volts.
Original Poster
ga3
Firing on 2 cylinders [L1]
Firing on 2 cylinders [L1]
Posts: 22
Topics: 3
Blogs: 0
Joined: Jul 11 2012, 3:16pm
Location: ny
Year: 2011
Make/Model: Chevrolet Silverado
Extra Info: lt
Group Membership:
Registered users

After market backup camera electrical connections

Postby Machster69 » Jul 18 2012, 12:54am

I was worried about that :/
Image
User avatar
Machster69
Shifting into Sixth Gear! [L3]
Shifting into Sixth Gear! [L3]
Posts: 7168
Topics: 56
Images: 12
Blogs: 8
Joined: Feb 16 2012, 3:03pm
Years of membership: 1 year of membership
Location: Baton Rouge
Year: 2010
Make/Model: GMC Sierra
Extra Info: 5.3 SLE 2wd
Group Membership:
How-to Authors
Forum Moderator
Registered users

Re: After market backup camera electrical connections

Postby ga3 [OP] » Jul 20 2012, 2:52am

AFTER thinking this out the answer was in the lights,The DRL circuit is the one, on during the day and night.thats if you drive with the running lights on {front} I do.A simple tap in the front light.keyed on and off.
Original Poster
ga3
Firing on 2 cylinders [L1]
Firing on 2 cylinders [L1]
Posts: 22
Topics: 3
Blogs: 0
Joined: Jul 11 2012, 3:16pm
Location: ny
Year: 2011
Make/Model: Chevrolet Silverado
Extra Info: lt
Group Membership:
Registered users

After market backup camera electrical connections

Postby Machster69 » Jul 20 2012, 6:03am

U did it already? Can you provide more specifics?
Image
User avatar
Machster69
Shifting into Sixth Gear! [L3]
Shifting into Sixth Gear! [L3]
Posts: 7168
Topics: 56
Images: 12
Blogs: 8
Joined: Feb 16 2012, 3:03pm
Years of membership: 1 year of membership
Location: Baton Rouge
Year: 2010
Make/Model: GMC Sierra
Extra Info: 5.3 SLE 2wd
Group Membership:
How-to Authors
Forum Moderator
Registered users

Re: After market backup camera electrical connections

Postby ga3 [OP] » Jul 21 2012, 9:06pm

I have a 2011 Silverado LT crew cab the backup camera kit i purchased was from rear view systems it is able to handle 3 cameras or a dvd (I am not using 3 camera's or a dvd just 1 camera ) after speaking to the tech service at rear view about the delay( 3 seconds) i encountered when i described how i hooked it up, monitor and trigger wire (2 separate wires) to the reverse lights (1 circuit ) they explained that the monitor will turn instantly if it is hooked up to a separate power source (other than the reverse) one that is on when the vehicle is running but shuts off when vehicle off, to prevent running down the battery (about 3 days without using vehicle)taping into any just circuit that is powered on when the vehicle is turned on can cause unexpected problems checking alldata for 2011 Silverado LT crewcab vehicle schematic# 2 DRL electrical diagram shows the yellow wire as hot when using the( DRL top headlight) that is were i taped in the Monitor circuit,Trigger wire light green to reverse light circuit.I drive using the DRL so this solves the problem for me.Also alldata electrical diagram 8 shows the backup lights circuit.
Original Poster
ga3
Firing on 2 cylinders [L1]
Firing on 2 cylinders [L1]
Posts: 22
Topics: 3
Blogs: 0
Joined: Jul 11 2012, 3:16pm
Location: ny
Year: 2011
Make/Model: Chevrolet Silverado
Extra Info: lt
Group Membership:
Registered users

Re: After market backup camera electrical connections

Postby ga3 [OP] » Jul 21 2012, 9:21pm

ALLDATA (lighting and horn) ( electrical diagram ) headlights and daytime running lights drl schematic 2,or exterior lights schematic 8.
Original Poster
ga3
Firing on 2 cylinders [L1]
Firing on 2 cylinders [L1]
Posts: 22
Topics: 3
Blogs: 0
Joined: Jul 11 2012, 3:16pm
Location: ny
Year: 2011
Make/Model: Chevrolet Silverado
Extra Info: lt
Group Membership:
Registered users
PreviousNext

Return to Electrical

 

  • Similar topics
    Replies
    Views
    Last post

Common search terms

power lights running market light drive rear electrical camera backup connections last black thanks problem front

It is currently May 23 2013, 7:25pm

Login  •  Register
SHOP TALK (Live Chat)
Electrical Forum
ElectricalDiscussion specific to electric components of trucks. Category for alternators or batteries, starters and ignition parts, anything 12v and electrical issue like fuses, circuitry, wire, terminals, switches, connectors, bulbs, relays, and wiring. Voltage and amperage diagnosis.
To create a new topic in Electrical, click this button:
Previous topic Next topic
Random Image Attachments
2009 Sierra Door Jambs (...
2009 Sierra Door Jambs (...
Attached by: Boucher187
A view to the german US-...
A view to the german US-...
Attached by: Rubber Duck
Interior LEDs Install
Interior LEDs Install
Attached by: Crazysquirrel
Lets see 'em
Lets see 'em
Attached by: wacker
Sitewide News Sitemaps & Feeds

Who is online

Users browsing this forum: No registered users and 13 guests