Chevy Silverado and GMC Sierra Forum banner

How to install billet air dam grille on 2003 GMC sierra

4K views 1 reply 2 participants last post by  kyleb395 
#1 ·
Hey guys,
Do any of you have some instructions you can give me on how to install my new billet air dam grille for my 2003 gmc sierra. I already have one on the top grille, but this one is for the bumper. It looks just like it, but it didnt come with instructions, just the things you need. Anybody know how to install it? Thanks
 
#2 ·
first you have to take out the black air dam in the space your gonna put it in. i believe thier is 4 or 6 clips holding it in. then hold it in place in the front with one hand while your looking at it from the back and mark out the holes with a marker/pencil because the space is slightly wider than the grille insert is. predrill the holes and then line the grill up and put the screws in it and screw 4 in evenly until it pulls the plastic to the grill and your done! that seems like alot but it really only takes 15-20 minutes
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top