Can this be replaced? - I have been trying to hunt down this piece of plastic molding for my drivers side seat for months now with no luck. About a ...

I have been trying to hunt down this piece of plastic molding for my drivers side seat for months now with no luck. About a year or two back someone while getting in or out of the truck snagged their foot on the side molding of the seat. Thus causing the plastic molding to bend outward and crack, slowly after that it became worse until it fell off. I have visited and called a lot of junkyards but it seems that on newer trucks they pull the seats and sell them as a whole. Posted below is a picture of the drivers side seat showing the damaged molding, any help in hunting down a replacement would be much appreciated.

I would try the dealer. Lot of the plastics are not to high priced.

Yep thats what i was starting to think unfortunately; guess ill make that stop when im back in the states. If anyone else has any suggestions or knows a place i can order one let me know please.

Try Schram Auto Salvage in Waterford, Michigan. They may ship parts to anywhere.

WingNut wrote:Try Schram Auto Salvage in Waterford, Michigan. They may ship parts to anywhere.

Or any junk yard at that.

for a piece like this if you call your local dealers parts counter and give them your vin# and tell them the part you may be able to get it pretty cheap. this is about the only time i would say go to the dealer but parts like this are hard to find and the dealers price isnt that bad (on these type items).

http://parts.nalleygmc.com/showAssembly.aspx?ukey_product=3084064&ukey_assembly=432032


Part number 16 on the diagram below...




About $17 + shipping... hope this helps.

Jim08SLE wrote:http://parts.nalleygmc.com/showAssembly.aspx?ukey_product=3084064&ukey_assembly=432032


Part number 16 on the diagram below...


About $17 + shipping... hope this helps.

Thanks Jim exactly what i needed

Are there two screws missing?? or does it hold in place with the two on the right???

It has 5 screws total, right now the front is snapped off where the front two screws are placed. The plastic molding that is snapped off is also held on with glue, hence that big vertical black spot.