... I can tell it by passes the thermostat as the clutch will say engaged as long as there is power to the #87 wire. I would have liked to fixxed it correctly, but it's working now so it's all good. If I was to try anything else it would be to replace the in dash control panel. Good Luck.
... Revs per mile: 607.31 Tire Info Came From Here: http://www.discounttiredirect.com/direc ... reMath.jsp ALSO to ... One BIG question so I can plan correctly .... Can I fit 275/60/R20 tires on a 20" XD Series Rims on my stock Sieraa Z71 4x4 without any level kit of any kind or do I at minimum ...
... past the rings and burning...Normally a good top engine clean done right I might add will do the trick. A lot of techs do not do the bulletin correctly so they still burn oil after performing the bulletin....hope this helps!!!
... the new filter, tightening it 3/4 of a turn after the filter gasket touches the filter boss on the engine block. Put the oil pan plug back in correctly torqued. Add five (5) quarts of new Mobil1 oil and start the engine. Check the gauge for good oil pressure and stop the engine. The add enough ...
Do you have them hooked up correctly. I haven't done mine yet (still waiting on my headlights) but I did a lot of reading, and I read something about our trucks having reverse polarity. Not sure if this blows fuses, or causes them to not ...
... the new filter, tightening it 3/4 of a turn after the filter gasket touches the filter boss on the engine block. Put the oil pan plug back in correctly torqued. Add five (5) quarts of new Mobil1 oil and start the engine. Check the gauge for good oil pressure and stop the engine. The add enough ...
... a lift spindle/ knuckle that gives you lift. instead of keys.. (my personal opinion) this wont mess with pre-loads or getting your t-bars adjusted correctly again And your alignment will be easier since the control arms stay in the same spot be aware that both will change your steering geometry ...
You could just use the RR WPR fuse in the interior auxiliary fuse panel. If I remember correctly, that should be on the ignition switch. Not sure if that would send to much juice to the amp though... for the remote it just needs to be 12v, its just a relay in the amp ...
... at a local auto electric store, it had the correct size plastic plug but I had to repin the harness in order to get everything to match up correctly (for those of us that don't mind a repin, I knowthis harness can be found for $40-$60 online! I'll try to scrounge up a part number or a link). ...
... I want to be able to adjust my transmission shifts, also, and recalibrate my speedo for the 20 inch wheels, which I never felt was calibrated correctly by the dealer.
Recent Images
Random Images
Recent Comments
Top Rated Images
Contest Winners
User Albums
Recent Blog Entries
Random Blog Entries
Popular Blog Entries
Blog Userlist
Create New Topic
Unanswered posts
Active topics
Headlines
List of Stickies
FAQ
Groups
Ranks
Our Staff
Merchandise
Photo Gallery Search
Blog Search
Directory Search
Facebook.com/SilveradoSierra
Twitter.com/SilveradoSierra
