ignition

ASTE25

Ignition modules are pretty common to go out.

SLE Z71

... off the unit (bottom) going to the truck (top) http://i568.photobucket.com/albums/ss130/RiiFFY69/WP_000263.jpg You can see the main wires red (ignition) , yellow (battery) and black (ground) from the head unit. Radio ....|.... Truck Red ..... to .....Black (which stumped me because I thought ...

SilveradoSierra.com

plowboy63

Just got truck back from shop they found the ignition was causing the problem seems to be good to go now

Daly

I believe you need to clear it, but you may be able to do that by cycling the ignition, check the owners manual.

retg

... in here What's the theft issue? You need the key, and to get into the vehicle you have to unlock the door and the key needs to be inserted and ignition turned to On/Run before the brake can be pressed. How I start mine. Hit Lock ONCE Press and hold remote start. Unlock door, get in, insert ...

robfriedenberger

You could just use the RR WPR fuse in the interior auxiliary fuse panel. If I remember correctly, that should be on the ignition switch. Not sure if that would send to much juice to the amp though... for the remote it just needs to be 12v, its just a relay in the amp that it controlling, ...

caledelong

... have a "clean" look to them! I'd love some member opinions. To power the LED strips I used the brown and white wire coming out of the ignition harness. This is the perfect place to take power from for interior strips, the wire only has power when the truck's dash has power (key accessory ...

raynclee1985

Thanks for the hint masterem...I switched out the ignition and it cleared the P0785, P1860, P0753 codes. All Im left with is P0740 & P0758. I was just going to replace them unless you can think of anything else?

RS2289

You could just use the RR WPR fuse in the interior auxiliary fuse panel. If I remember correctly, that should be on the ignition switch. Not sure if that would send to much juice to the amp though...

BackwoodDweller

Got lucky on mine and just disconnected the wire going into the actual ignition cylinder. No resistors, nothing...idiot light stays on, but if I use my power locks, I still have full security arming (I don't use the remote...little prick was aiding the problem).

Found 1461 matches: ignition

Re: 1991 silverado won't start

I don't like to give up but this is NUTS!

Re: 97 Z71 Lost 1st gear

Re: 2003 Suburban check engine light on

Re: How does remote starter work?

Re: Need Remote Turn On Location

JVC Double DIN & Interior Light Strips

Re: '03 Silverado will not shift

Re: Need Remote Turn On Location

Re: passlock II system

More Results