I am in the market for a 03-06 silverado 1500, i plan to lower / level it on 24's. would like to close up the wheel well gap as much ...

I am in the market for a 03-06 silverado 1500, i plan to lower / level it on 24's. would like to close up the wheel well gap as much as possible without any rub! I have been all over the place looking at lowered silverados, with 2/4 drops, 3/5 drops, etc... but no one seems to specify all of the details, like what type of kit they used, size of the rims / tires. Basically post pictures of your truck, what kit you used, how low it is in front and back, and what size rims / tires you are running to help me get an idea if possible. Any and all input is appreciated!

Check out cardomain.com they have lots of trucks with lots of information.

sorry for the small dark image but it's the only one i have of my 01 after my computer was stolen


truck: 2001 chevy silverado ecsb w/ 5.3l
drop: 2/4 drop
front specs: mcgaughy's 2" drop spindle w/belltech nitro drop shocks
rear specs: mcgaughy's 2" drop shackles and 2" drop hangers w/belltech nitro drop shocks

wheels: factory 17" escalade wheels
tires: 255/50/17...not exactly sure on size

Here's mine: 04 Sierra SLT with Belltech drop spindles and lowering springs in the front and Belltech hanger/shackle combo in the rear with Belltech street shocks all around. Installed a McGoughy C-section kit to the rear to prevent bottom out against the frame. Comes out to roughly a 4/6 drop. 22" Demota wheels wrapped with 265/35/22 tires.









Joel

Here is my truck:




1999 Silverado Ext. cab short bed 5.3l
2/2 drop
2" Belltech drop spindles up front
2" Belltech drop shackles in the back

20"x9" American Racing Circuit rims with 285/50/20 Nexen Rodian HP's

3" drop all over