My 07 came with all the wires under the dash all that i had to ad after i wired it up was a fuse under the hood by the main ...

HFD121 · by **HFD121** » Jul 25 2010, 2:20am

My 07 came with all the wires under the dash all that i had to ad after i wired it up was a fuse under the hood by the main fuse block that was marked trailer acc.

Related Topics electric start 92 Silverado 3/4 no electric no nothing.... electric fan help New Electric Supercharger Electric Mirror Problems ac compressor and electric fan help will i have to change to electric fan Electric window problem Electric side steps Crazy Electric Gremlins Snow Plowing and Electric Fans 2011 Sierra (electric vs manual) Clutch fan to Electric fans? Electric fan relay died..

bubbasparks · by **bubbasparks** » Nov 07 2010, 4:53pm

koolz71 wrote:what you need is a jumper cable like the one i am attaching a picture of..basically is a plug and play..it plugs into a harness under the dash then you have to install a electronic brake controller and wire it up. Once this is done your good to go. Sometimes it may be under the dash, in the glove box, hidden along the frame rail or if you have the bucket seats it could be underneath the cup holders. If you have any more questions we will be more than willing to help u out

My plug was in my glove box when I bought my truck. My one buddy found his under his back seat.

Z15 · by **Z15** » Nov 07 2010, 6:09pm

A 2006 truck did not come with a electric brake controller. You have to buy one and install it.

I just had one installed on my 2010 and the wires were above the steering column taped to the wire harness, there is no plug, just a wire pigtail you have to solder in.

It only took them a hour to install a Tekonsha Prodigy on my truck last week.

WingNut · by **WingNut** » Jan 31 2011, 7:47am

I'm going to follow this up when I return home in June. I did all the steps mentioned above. Installed pigtail, ensured power to electric control unit, and have checked on a multi-meter that signal voltage is coming out of the unit when the brake is depressed.

However, there is still no signal seen at the 7-pin connector. (light blue wire I beleive)

BTW, I have the Z85 tow/suspension package.

In2Trux · by **In2Trux** » Jan 31 2011, 1:41pm

This would be a great topic for a HOW TO
I have a 07.5 Silv NBS and the owner b4 me butchered the wiring under the dash to put in his electric brake controller.
Then he took it out when he traded in. I'd like to clean it up and do it right.

Random Image Attachments
Vacuum Brake Booster Attached by: BluStreak
[Signature] Request Attached by: #32
Factory steel wheels, wh... Attached by: Bostonmaniac781
Defective Michelin Truck... Attached by: QSteering

My 07 came with all the wires under the dash all that i had to ad after i wired it up was a fuse under the hood by the main ...

electric brakes

Re: electric brakes

Re: electric brakes

Re: electric brakes

Re: electric brakes

Re: electric brakes

Common search terms

Who is online

Towing/Trailers Forum
Discuss towing and trailers and plows, or overdrive and hitch towing capacity (gvw) and tongue weight for heavy loads. This is the place for tow hitches, receivers, and trailer wiring as well as snow plowing.
Post a new topic To create a new topic in Towing/Trailers, click this button:
Previous topic Next topic