awsome, thank !

awsome, thank !

Now your problem will be finding a torque wrench that measures to the tenth of a foor pound. lol. Seriously, I think you will be ok rounding it to 22 Ft pounds.

my problem when doing the pan drop is, that shift cable.

but anyway my next plan is doing coolant flush like u told me. and atf and filter change is mabe couple week later.

You can carefully bend the shift cable mount a bit and the pan can clear it. If you are not comfortable doing that, you can remove it.

Today I try to hammer in a 16 point side 14 shocket ( I dont know If im doing any damage to the tranmission by bang on the drain plug bolt ), anyway no work, make more strip, ASTA ! I dont want use the thing you told me, cause im affaid I hit it so hard something fall down inside

I use a big vice grip, and grip it hard I can, make more mess.

Last option, My friend gonna try to welt in a side 14 or 15 bolt on the trip plug, and hope we can get it loose.

You can try to weld something to the plug, but everytime I try that, weld ends up breaking. I still think you should try the damaged bolt sockets. The link is in a previous post of mine. I've removed 5 plugs that way.

Good luck, it sounds like you are gonna need it.

2003Z71 wrote:You can try to weld something to the plug, but everytime I try that, weld ends up breaking. I still think you should try the damaged bolt sockets. The link is in a previous post of mine. I've removed 5 plugs that way.

I guest I have to order it. I just saw this on youtube, and its same set like your , I use too much moneys since I bought the truck, I told my girlfriend I dont need fix anything, seem like everything I try replace something. Cheer man !!
http://www.youtube.com/watch?v=5ZP05y32 ... re=related

ASTE25 wrote:Good luck, it sounds like you are gonna need it.

Thanks Aste, cheer !