Chevy Silverado and GMC Sierra Forum banner

Transfer case questions

946 views 2 replies 2 participants last post by  DC443 
#1 · (Edited by Moderator)
Ok a few transfer case questions before I put this thing back in!
First is this normal for the studs to be out a few threads? (See attachment)
image.jpg

Second is it ok to loctite those studs?

And third here is where the adapter plate is cracking this is the 3rd one I have put on in a month

image.jpg
 

Attachments

See less See more
2
#2 ·
As long as the studs are tight it should be fine. I see no need to lock tite the threads, but I guess it won't hurt to do it. I'd check the output shaft from the transmission to see if it is bent. If it is, it could be putting stress on the adaptor and causing it to break.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top