Chevy Silverado and GMC Sierra Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
136 Posts
Discussion Starter · #1 ·
Im installing a 2.5" RC leveling kit, on a 2013 GMC Sierra 4x4, would you go with 285s or 295s on the stock wheels? I want it to fill the wheel well, but not rub a lot.
 

·
Registered
Joined
·
5,856 Posts
The 295's will rub plastic and the sway bar at full turns. With a ziptie mod on the plastic and some small trimming you can run them. You do have to teach yourself full lock turns will rub the sways. No biggie, I ran 295/70/18's on a 2 inch level kit with stock rims and just never turned the wheel that last inch.
I agree with Dmanj though. 285's are probably the best bet if you dont want the above issues.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top