[Harpes28]

Hey guys

I am new to this site. so i have a 2012 chevy silverado, 3 inch lift 35's on it. Every time i hit the brake or turn into a parking stall(slow speeds or shifting weight) a creek comes from my front drivers side a-arm area. I have used a pry bar and pryed on the ball joints. Checked the tie rods, replaced the cv-axels(both sides). and still cant find the creaking noise. the noise is definitely developing it went from being moderate to only doing it on some brake applications to non stop!! someone please point me in a direction! Thanks

 

[country1911]

Have you tried greasing the sway bar bushings?

 

[GMT604]

You guys and your lift kit problems. :lol:

Squeaking front driver side when turning and going over bump

 

[BigBlueLB756]

Got nerf bars that mount to the body bolt pockets, instead of the rocker panel?
Check for clearance issues with the bar bracket touching the body bolt pocket if you find it's not a suspension issue.

 

[Harpes28]

Yes I do have nerf bars on it I will be checking once I am on days off... It now started a popping noise when I turn into a parking stall.

 

[ferraiolo1]

Are you using stock UCAs or a diff drop with your 3in lift?

Sent from my iPhone using Tapatalk

 

[Harpes28]

it has drop brackets for the front diff. i will be looking into it a bit more in the upcoming days. So you think go for the nerf bars??? whats wrong with the brakets

 

[BigBlueLB756]

This is what I was referring to:
Nerf Bar Installation and now a squeek.

Hope it's your problem because it's an easy fix.