[Alex_M]

I was hoping that I could get some Hub Center to Fender measurements on other people's 07-13 Silverado 1500s to compare to mine with either stock or leveled trucks. If you're leveled, please include how tall of a leveling kit you have.

Thanks everyone!

 

[ferraiolo1]

Just so you know Each truck is different. Some need a 1.5in level to level it out. Others need 2.5in.

Sent from my iPhone using Tapatalk

 

[Alex_M]

I know. I'm really liking to see what the actual max I can put in is without drastically increasing wear. I don't know if my springs have sagged any or not. Thank you, though.

 

[ferraiolo1]

2.5 is the max. My front was actually 3in lower than my rear. So even with a 2.5in kit my rear is still a littler higher

Sent from my iPhone using Tapatalk

 

[Alex_M]

2.5" over stock is max, buy if my springs are sagged then I can also add the amount of height that my truck has lost. For example, if they sagged 1/2" then I can add 3" leveling spacers and that would be the same suspension geometry as a 2.5" spacer off the factory line.

 

[Alex_M]

Can anyone throw me some measurements?

 

[ferraiolo1]

Your springs aren't going to sag .5in unless there is 250k on your truck. Compare your front to your rear and go from there

Sent from my iPhone using Tapatalk