Chevy Silverado and GMC Sierra Forum banner
1 - 2 of 2 Posts

· Registered
71 Posts
Discussion Starter · #1 ·
I plan on putting the new style tow mirrors on my 01' Sierra. Currently I have no sort of power to the mirrors. If I was to buy the new style with wiring for the front LED and also signal on the mirror lense, is there a way that I would be able to wire them up? Thanks

· Supr Moderator AutoTech SS-Guru Mbr Extraordinaire
2015 High Country Duramax
20,661 Posts
So you have the manual mirrors currently correct?

I'd just get manual mirrors that have the leds in them if you can get them. You'd need to do a lot of wiring on the truck to get the power to work and all.

Or you can just wire the leds, which you'd need to do either way, and just adjust the power mirrors by hand.

Or there's a chance the power mirror harness is on your truck already. Or maybe part of it. You'd have to check.

Sent from my SM-N910V using Tapatalk
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.