[silver04]

A 4x4 or 2wd?

4x4

 

[silver04]

hub bearings are bolt in sealed unit, no press needed.

You might need the rubber bushings for the upper and lower a-arms, but that's a bigger job to do (at least with torsion bars).

You might also see if brake pads/rotors are good. And the metal brake lines as they run along the frame from the drivers front wheel to the abs controller inside the frame rail beneath the driver's seat, they are prone to rust...

192k.
I’ve already replaced the brake lines. And changed the brake pads and rotors not too long ago.