no you need the antenna to go up and over the cab, to get a good signal.. you will also need and SWR meter to tune in the antenna(s)..

 

So taking that into consideration. I was looking on here that some one had a mount next to radio antena do cb radios and normal radio frequencys ever overlap or interfere???

 

you will get interference.. you probably will get the annoying whine in your radio or get staticy station interference on the cb; which ever is greater. if your antenna is long enough or is a long whip that extends to the rear, this will be minimal. This is increased by the wirings being close together since neither are shielded.

this i why radio antennas are put on the opposite side of the antenna mast for the radio and/ or in the bed

 

So really the only option is to mount in in the bed or maby on the roof ???

 

people put them on the bed rails, roof, and mirrors (well in the old days) and opposing side of the radio antenna, or they find a shielded type antenna, that costs more. Its also a good idea to make sure wiring is right, and secure/ protected..nothing like a ground cable rubbing on the frame

 

I would go with a k40 with a mag mount. Its plenty high enough and the easiest way to do it. Its a great antenna.

 

I have my CB antenna mounted right across from the radio antenna and didn't get any interference. Although I was running a 4 foot antenna so that might be why like BogginChevy said. I love my mount though, no drill and it looks as factory as it possibly can. Install was a pain in the butt though but that's only because of where it mounts and I installed it back in February.

 

If anyone is looking for a "deal" on an antenna.....Loves is sort of kind of having one.

Love's: Special Offer! Buy K-40 Big Coil 20,000W Antenna & get 500 pts. Offer ends 4/30. Info, https://qpn.io/5P9I3N

 

Checkout Firestik antenna's...

 

i have a 102" whip mounted behind my toolbox

2009sierraZ71

 

Yep. I have a 102" with a 7" Gunny Riser behind my toolbox too. It works pretty decent.