As soon as I post this I get a bunch of recommended posts leading me to different solutions. I guess I am just not good with keywords and searching

 

You might try removing inner door panel and try tightening the screws that hold the window in. I`ve had to do this on mine when i was trying to fix wind noise.

 

You might try removing inner door panel and try tightening the screws that hold the window in. I`ve had to do this on mine when i was trying to fix wind noise.

I most likely won't be able to do that because I have the three door and the driver's side is near impossible to get the panel off, not really but it is a full day job, almost would rather just go back to the deck screw.... I ended up buying this https://www.ebay.com/itm/282024612006 I've heard a lot of great things about it so I am going to put it in and hopefully get some good results.

 

I've heard of folks using them with success. I haven't tried them.
On mine, the screws holding the window in were loose and needed to be tightened. Unfortunately the panel has to come off to get to those screws.

 

This picture is from one of my other trucks, but is the best picture I could find showing one of the window screws.
The window latch will hold the window tighter to the window frame, but won't help if screws holding the window frame to the body / door are loose.

 

This picture is from one of my other trucks, but is the best picture I could find showing one of the window screws.
The window latch will hold the window tighter to the window frame, but won't help if screws holding the window frame to the body / door are loose.

Ahhhh thank you for the photo was wondering which screws you were talking about exactly. Yeah those are impossible on the three door driver's side. Would take a whole day to take apart the damn thing.